Wort Chillers

---

Made from 10mm soft wall copper tubing, this simple chiller can cool 20 litres of wort to 20°C in around 30 minutes (depending on coolant temperature). Immerse in boiling wort for the last few minutes to sterilise chiller, then run cold water through.

Homebrew version of a professional plate heat exchanger with 12 stainless steel plates . No pump required (gravity feed is sufficient). Cools 20 litres of hot wort to 20°C in under 10 minutes!!!

Connections are standard 3/4" BSP

Professional chiller for microbreweries with all stainless steel AISI 316 chassis. No glue due to the use of Nitryl CLIP seals. Connections DN32 female for wort, 1" male for cooling water. Cooling capacities are calculated using 95°C wort to 25°C with twice the flow of cooloing water at 10°C 

Available cooling capacities (per hour): 500 litres, 1000 litres, 2000 litres